Formlabs Form 4 Finish Kit

Included in the Toolkit

1. Wash Buckets: Two plastic buckets for solvent use. Lids can be tightly closed to reduce solvent evaporation.
2. Rinse Basket: Used to transfer parts between buckets. It can rest on the edge of the wash bucket for draining.
3. Wash Bottle: Fill with fresh solvent for rinsing printed parts and internal channels.
4. Plastic Scraper: Used to inspect and clean the Form 4 resin tank.
5. Metal Scraper: Used to remove parts from the build platform. Do not use this tool on the Form 4 resin tank.
6. Removal Tool: Used to press under the base to detach parts from the build platform.
7. Build Platform Clamp: Holds the platform securely in place, making it easier to remove printed parts.
8. Flush Cutters: Used to carefully remove supports from printed parts.
9. Disposable Nitrile Gloves: Wear gloves when removing and post-processing printed parts.
10. PEC*PAD Wipes: Disposable, lint-free, non-woven microfiber wipes for cleaning optical components.

How to Use

Install the Form 4 Build Platform Clamp Secure the clamp to the edge of the work surface by tightening the screw underneath. Ensure there’s enough space around the clamp for comfortable operation.
Mount the Build Platform onto the Clamp With the printed side facing up, slide the build platform handle into the designated mount on the clamp.
Remove Printed Parts from the Platform Use the removal tool or metal scraper to detach parts from the build platform.

Note: Using sharp tools on resin-covered build platforms or other smooth surfaces may cause sudden slips. Always cut or scrape away from your body to avoid injury.